The Planograf is used to TP just 2007 to measure flatness on road surfaces in the road and road construction, to assess longitudinal roughness of surface layers. The Planograph is used to determine the flatness of surfaces in the longitudinal profile. He recorded deviations Center almost continuously in a 4 m-long virtual zero line and consists of a frame with 10 wheels, a wheel, a wheel and a drawbar. The Planograf is pulled by the examiner over the road surface longitudinal. The ANIX company from Saxony-Anhalt has further developed the design of the Planographen and adapted to the electronic evaluation unit. Under most conditions Jeff Flake would agree. The new Planograf AX 02 the Anix GmbH consists of three single Segmenten.Diese split four-metre construction made of aluminium and stainless steel is so easy to carry and to connect on the spot by only one person a special trailer is not required.

It is possible to transport in a station wagon. The deflection of the framework is decisive for the quality and function of the Planografen. A Value of 0.8 mm deflection is allowed. The new Planograf AX 02 meets this requirement with sufficient reserve! New is also the adjustment secure suspension. This is done by vertical adjusting screws.

The separable Planograf can be drawn by a person at drawbar or used with trailer hitch on the car in the walking speed. With a modern electronic off value device m is also all flatness history that records track surface on an SD card in addition to the excess p and p. The evaluation of the line automatically and can be spent on the built-in mini printer. In addition, the course of flatness over the entire distance in graphs on the PC can be displayed and printed out. The off value device can be used on the Planografen or in the towing vehicle. The Planograph is used to determine the flatness of surfaces in the longitudinal profile. He recorded deviations Center almost continuously in a 4 m-long virtual zero line and consists of a frame with 10 wheels, a wheel, a wheel and a drawbar. The Planograf is pulled by the examiner over the road surface longitudinal. It records the distance traveled and the vertical movement of the measuring wheel below the zero line on the SD card. Exceeding the limit – usually 4 mm – a warning signal is sounded and the value is used for the calculation (p, p m) separately recorded. The electronics are housed in a rugged waterproof casing, which is fastened with a strap on the Planografen. The evaluation of the line automatically at the end of the measurement and can be spent on the built-in mini printer. For the processing of the data on the PC, an Excel template is supplied with whose help the course of flatness over the entire distance in graphs can be generated. Experience the benefits of the Planografen AX 02 : 3 segments, with low weight, easy to carry, no special trailer required space-saving storage simple connection spot, also by one person innovative combination of segments, very low Deflection robust and durable, suitable for measurements in step speed 8 km/h corrosion-resistant construction wheel adjustment by means of vertical adjusting screws bit error-prone, overall system easy to adjust Delta TEC service Neumunster INH. Gunther Stephen